A: Yes! “Gel” nail polish products which do not require an LED or UV light to cure are not real gel nail products—they are regular nail polish being deceptively marketed. With any genuine gel nail polish (like OPI), an LED light is a must.
Accordingly, how do you use OPI gel top coat?
Apply 2 thin coats leaving a tiny margin around the cuticle area. Cap the free edge to prevent shrinkage. Cure each coat 30 seconds in the OPI LED Light. Shake GelColor Stay Shiny Top Coat vigorously for 1 minute.
Hereof, can you use OPI gel top coat on regular polish?
Fortunately, if you‘re careful and patient, you can! For a simple combined manicure, apply your regular polish and then add a gel topcoat once it’s dry. For a little extra durability, make a “gelly sandwich” by layering regular polish between 2 gel coats.
Which is better Shellac or OPI gel color?
( Shellac is just a Brand of a Gel Polish blend) so Shellac and OPI Gel Polish are the same thing! … Because it is like a gel, however, it does add strength and durability. In the long term, Shellac /OPI Gel polish is much less damaging to nails than traditional Gels (or Acrylics).
How do you apply OPI gel polish without UV light?
How To Use Gel Nail Polish Without a UV Light?
- Using an ice bath will help freeze and dry gel polish.
- Air drying it under the sun (as they have UV rays) may work but will take longer.
- Invest in products such as quick drying spray. …
- Thinner coats will help cover the polish and let it settle.
How many coats of OPI gel top coat?
Apply two coats of GelColor and cure for 30 seconds after each coat. 3. Shake the bottle of ProHealth Top Coat vigorously, then apply it to the nail and cure for 30 seconds. Remove from the lamp and wipe off the inhibition layer.
How long does OPI gel top coat take to dry?
10-15 minutes
Why is my OPI gel not drying?
It sounds like the gel-polish is not fully cured. … It is also possible that you are applying the gel-polish too thick. When gel-polish is applied too heavy, the UV light cannot penetrate through the entire layer to cure it properly. Uncured gel-polish can cause the top coat to dull and also get wiped away with cleanser.
Is OPI Top Coat good?
It leaves a decent shine on the nails and it stops my nails from chipping. I also really like it because other top brand-name top coats usually cause my nails to peel off in one big layer, but this OPI top coat really sticks the base coat and color to my nails.
Why does my OPI gel nail polish peel off?
The reason for this is because oils can accumulate on the free edge of the nail, so the edges need to be filed and cleaned before you begin your gel manicure. If you don’t do this then moisture and oil can get underneath the nails and this can lead to peeling.
How do you apply gel top coat over regular nail polish?
Can you put gel base coat over regular polish?
Yes, you can use a gel polish on top of another gel polish. A gel-ception. The same rules apply – you will need to make sure that you paint over the colour underneath to avoid it looking messy and unprofessional. If you are using gel polish, be sure to use a UV lamp to cure the polish and lock it in place.
Can you put another coat of gel polish over the top coat?
Can I add another coat of gel polish over my gel polish and cure it again? Yes, you can. I typically do 3 coats just for the added strength and color it gives my nails. The only draw back is that the removal always adds additional time to remove them because the acetone need to penetrate all the layers.